*** Support for this modem requires PocketPORT firmware
version 2.2.123 or later. Configure the USB800 to Auto Connect and enter the correct APN for your AT&T account via the USB800's internal web server (http://192.168.1.1) with the modem plugged into a PC before attempting to use the USB800 with the PocketPORT. The USB800 must be in IPPT & End User Modes - with the modem in a PC, go to http://192.168.1.1/labtestinfo and select IPPT & End User Modes if the PocketPORT does not go online. When operating in NAT Mode, PocketPORT LAN IP subnet must be changed from 192.168.1.x / 255.255.255.0 to avoid IP conflicts with this modem. This modem takes longer than most others to connect to AT&T. Allow up to 2 minutes for the connection to complete. We recommend disabling AutoPing when using this modem by clearing the AutoPing Target IP address in the PocketPORT. The USB800 uses a nano sized (4FF) SIM card.
|